Nintendo Switch

Nintendo Switch Refusing to Connect to Your TV? Here’s How to Fix It

Are you facing issues in connecting your Nintendo Switch to the TV? However, sometimes it can be frustrating when your Nintendo Switch refuses to connect to your TV. This issue can happen for a variety of reasons, but the good news is that there are easy ways to fix it.

I also faced the same issue when I got my new Nintendo Switch when I did not know what to do in this specific case. My Nintendo Switch was not connecting to my TV. Then, I searched through the internet, and here’s what I found.

Nintendo Switch Refusing to Connect to Your TV


Check the HDMI Cable

The first step is to check the HDMI cable that connects the Switch to the TV. Make sure it’s firmly connected to both the console and the TV. If the cable is loose, the connection may not be stable, causing the TV to display an error message or no signal at all.

Check the TV Input

Another common issue is selecting the correct TV input. Make sure your TV is set to the correct input channel that corresponds with the HDMI port you are using. If you are unsure which input channel to select, consult your TV manual or try cycling through the channels until you see the Switch display.

After that Make sure that your TV is turned on and set to the correct input. Some TVs have multiple inputs, so make sure that you have selected the right one.

To do this,

  1. Turn on your TV and navigate to the input settings.
  2. Check to see if the input channel is set to the correct HDMI port that your Nintendo Switch is connected to.
  3. If it is not set to the correct input, change it to the correct HDMI port.

Restart the Switch

If the HDMI cable and TV input settings are correct, try restarting the Switch. Hold down the power button for a few seconds until the power options appear, then select “Power Options” and “Restart.”

This will reset the console and may help resolve any software-related issues that were causing the connection problem.

Try a Different HDMI Cable or Port

If the above steps don’t work, try using a different HDMI cable or port. Sometimes, the HDMI cable or port can become damaged or worn out, causing connection issues. Swap the cable or try a different HDMI port on your TV to see if this solves the problem.

This could possibly solve the problem which would help in making sure that you connect your Nintendo Switch to your TV without any problem. Hope the problem will be solved after changing the HDMI cable because most of the time, the Nintendo Switch easily gets connected only by changing the HDMI cable.

Check for System Updates

Finally, make sure your Switch is up to date with the latest system updates. Nintendo frequently releases updates that include bug fixes and other improvements that can help resolve connection issues.

To check for updates, first of all,  go to System Settings > System > then System Update.

Check Your Nintendo Switch Settings

If the input settings on your TV are correct and you are still experiencing issues, the next thing that you need to do is check your Nintendo Switch settings. To do this, you need to:

  1. First of all, turn on your Nintendo Switch and then go to the home screen.
  2. Select “System Settings” and navigate to “TV Output.”
  3. Check to see if the resolution and sound settings are set to “Automatic” or if they match your TV’s specifications.
  4. If the settings are not correct, change them to match your TV’s specifications.

Check Your Cables

Another reason why your Nintendo Switch may not be connecting to your TV is due to faulty cables. To check if this is the case, you need to follow these steps:

  1. Turn off your Nintendo Switch and unplug the HDMI cable from both your Nintendo Switch and your TV.
  2. Check to see if the HDMI cable is damaged or worn out.
  3. If the HDMI cable is damaged or worn out, replace it with a new one.

Restart Your Nintendo Switch and TV

If none of the above solutions work, the next thing that you need to do is restart both your Nintendo Switch and TV. To do this, you need to:

  1. Turn off both your Nintendo Switch and TV.
  2. Unplug both devices from the power source.
  3. Wait for a few minutes.
  4. Plug both devices back in and turn them on.

Update Your Nintendo Switch

If restarting your Nintendo Switch did not fix the issue, try updating your console. To do this, you need to go to the Home menu and then select System Settings.

From there, select System, and then select System Update. If there is an update available, download and install it. After that, what you need to know is simply to update your system and make sure that all the updates are fully installed.

Check for Interference

Another common cause of connectivity issues is interference. Make sure that there are no other electronic devices near your Nintendo Switch that could be interfering with the signal.

Some common devices that can interfere with the signal include wireless routers, cordless phones, and microwave ovens. Move your Nintendo Switch away from these devices or turn them off to see if that fixes the issue.

Reset Your Nintendo Switch

If none of the above solutions work, you can try resetting your Nintendo Switch. This will clear any settings or configurations that may be causing the issue.

To reset your Nintendo Switch, go to System Settings and select System. From there, select Formatting Options and follow the instructions to reset your Nintendo Switch.

Contact Nintendo Support

If you’ve tried all of the above solutions and you’re still having trouble connecting your Nintendo Switch to your TV, you may need to contact Nintendo support.

They can help you diagnose the issue and provide you with further instructions on how to fix it.


Why won’t my Nintendo Switch connect to my TV?

There could be several reasons why your Nintendo Switch is not connecting to your TV. It could be due to a loose cable, an outdated software version, or a problem with your TV settings.

How do I know if my HDMI cable is working?

If you suspect that your HDMI cable is not working, try plugging it into a different device. If the cable works with the other device, then the issue is likely with your Nintendo Switch or TV.

Why is my Nintendo Switch dock not working?

If your Nintendo Switch dock is not working, it could be due to a loose cable or a problem with your console. Try unplugging and replugging all cables, restarting your console, or contacting Nintendo customer support for further assistance.

Also read: How to Fix Your Nintendo Switch Lite Joystick Issues


In conclusion, if your Nintendo Switch is refusing to connect to your TV, don’t panic! There are easy steps you can take to troubleshoot and fix the issue. First, check your TV and cables to make sure everything is connected properly.

If that doesn’t work, try restarting your console or updating the software. By following these simple steps, you can get back to gaming on your TV in no time. Also, if you have some questions related to this article, do not hesitate to contact us.

Talha Hanjra

Hi! I'm Talha Hanjra. I have a natural affinity for cutting-edge technological devices, and I enjoy finding solutions to their difficulties. I'll tell you how to fix various outdated gadgets and where to buy the best products. My research and experience will be of tremendous use to you.

Leave a Reply

Your email address will not be published.