Xbox One Controller Won’t Stay On? Here Are 9 Solutions!

Haider Sultan August 18, 2022April 13, 2023 0 Comments fix, gaming, solutions, xbox, xbox one, xbox360, xboxcontroller

Your Xbox One controller won’t stay on? Here are 9 solutions to fix this problem! But first, this happens because of the controller’s battery power.

For further problems and solutions, read this comprehensive guide because one of my cousins also had this problem. Being a veteran in the field, I guided him as much as I could. All of the solutions and fixes are mentioned below.

So, you can use another power source to fix the problem, such as a wall charger or car charger. Or you can also replace the batteries with new ones and recharge the new batteries before using them again.

Table of Contents

1. Update Your Device

If your controller won’t stay on, the first thing you should do is check for updates. Microsoft releases regular updates for the Xbox One, and these often include fixes for common problems.

In order to update your console, first of all, you need to go to Settings > System > Updates. If there’s an update available, it will be downloaded and installed automatically.

2. Check Your Power Supply

If your Xbox One controller won’t stay on, the first thing you should check is the power supply. If the batteries are low, the controller will turn off to conserve power.

To check the batteries, open the battery compartment and make sure that the batteries are seated properly. If they are, try replacing them with fresh batteries.

3. Use your controller on a PC to check its functionality

If you’re having trouble with your Xbox One controller not staying on, there are a few things you can try to fix the issue.To begin with, verify whether your controller is still covered by warranty.

In case it is, you may be able to get a replacement from Microsoft. If not, there are a few things you can try yourself to fix the problem.

4. Reset your wireless router or modem

If your Xbox One controller won’t stay on, the first thing you should do is reset your wireless router or modem. To do this, unplug the power cord from the back of the router or modem.

then re-plug the power cord after waiting 30 seconds. Wait another minute or two for the router or modem to finish booting up, then try using your controller again.

5. Wireless interference from other devices

If you’re experiencing connection issues with your Xbox One controller, it could be due to wireless interference from other devices. To fix this, try the following:

1. Move your Xbox One and controller closer to the console.
2. Remove any objects between your controller and the console that could be causing interference.
3. Turn off any devices in the area that could be causing interference, such as microwaves or baby monitors.
4. If you’re using an extender, make sure it’s properly connected to your console.
5. Update your controller firmware.
6. Restart your Xbox One console and controller.
7. Perform a power cycle on your Xbox One console

6. Remove the battery from your controller and clean it with rubbing alcohol

One potential reason your controller may not be staying on is that there is something wrong with the battery. To fix this, you can try removing the battery and cleaning it with rubbing alcohol.

This will aid in getting rid of any dirt or debris that might be the problem. You can try one of the other options listed below if this doesn’t work.

7. Check your charging cable for damage

If your Xbox One controller won’t stay on, the first thing you should check is the charging cable. If the cable is damaged, it may not be able to provide enough power to keep the controller charged.

To check for damage, look for any kinks, frayed wires, or exposed copper. If you see any damage, you’ll need to replace the cable.

8. Have you tried connecting via USB instead of Bluetooth?

If your controller won’t stay on, one solution is to connect it to your Xbox One via USB instead of Bluetooth. To do this, simply connect the controller to the console with a micro USB cable.

Once connected, you should see that the controller’s Xbox button stays lit. If it doesn’t, try pressing and holding the bind button for three seconds. If that doesn’t work, your controller may be faulty and you’ll need to get a new one.

9. Why Not Buy a New Controller

One possible reason your controller won’t stay on is that the batteries are low. If you’re using AA batteries, try rechargeable batteries. If that doesn’t work, it’s possible the battery contacts are dirty. With a cotton swab bathed in rubbing alcohol, you can clean them. Another possibility is that your controller firmware is out of date.

You can update it by going to Settings > Devices & connections > Accessories, selecting your controller, and then selecting the Firmware version. If none of those solutions work, try resetting your controller.

To do that, go to Settings > Devices & connections > Accessories, select your controller, and then select Reset. Finally, if none of those solutions work, you may need to buy a new controller.

FAQs

What problems do people face while using Xbox? What are their root causes? Some of them are discussed briefly in our article on Xbox controllers.

What can I do to make my Xbox One controller stay on?

Replace the controller batteries with new ones and double-check that they are properly placed into the controller if your controller won’t turn on at all. Note If you’re using an Xbox Elite Wireless Controller Series 2, skip this step since it has a built-in battery.

If your controller keeps shutting off, how can you fix it?

The most frequent problem is fading batteries, which can make your controller behave erratically or even shut altogether. You can use whatever extra batteries you have around, but make sure they are high-quality ones because lower-quality cells will only last a day or two.

Also read: Fix Xbox 360 Power Supply Yellow Light Problem – Best Solutions

Conclusion

If your Xbox One controller won’t stay on, there are a few possible reasons why. The most common reason is that the batteries are low, so be sure to check that first.

If the batteries are fine, then it’s possible that there’s a problem with the controller itself. In this case, you’ll need to troubleshoot the controller to see if it can be fixed.

In case you got your issue resolved, then do not forget to leave a comment down below :). It will encourage us to add more articles like this.

Peak Searchers