Why Won’t My Xbox 360 Read Discs Anymore and What Can I Do About It?

One of the most frustrating things that can happen to an Xbox 360 is that it suddenly stops reading discs, whether they’re games or movies.

If you have this problem, don’t worry; there are several things you can do to get it working again, from doing nothing at all to sending it in for repairs or replacing the DVD drive altogether. The first thing you should do is see if the problem goes away by itself, which means you need to troubleshoot it.

Clean Your Disc

One reason your Xbox 360 might not be reading discs is that the discs are dirty. To clean your disc, gently wipe it in a circular motion with a soft, dry cloth.

If there are any stubborn smudges, you can try cleaning the disc with a little bit of water and dish soap. Dry it thoroughly with a soft cloth before inserting it into your console.

Clean Your Console

If your console is dirty, it might be the reason why it’s not reading discs properly. To clean your Xbox 360, start by unplugging all the cords and taking them apart. Once it’s disassembled, use a soft cloth to wipe down the inside and outside of the console. Assure to focus on the disc drive.

You can also use a can of compressed air to blow away any dust that’s accumulated inside the console. Once you’re finished cleaning, reassemble your Xbox 360 and try playing a disc again.

Troubleshoot the Hard Drive (for Xbox)

If your Xbox 360 won’t read discs, it may be because the hard drive is corrupted. To troubleshoot this, try restarting the console. If that doesn’t work, you can try removing and then re-inserting the hard drive.

If that doesn’t fix the problem, you may need to replace the hard drive. If this still does not solve the issue, then move to next step.

Use a Bluray Drive for Some Games

The first step is to see if you can use a Bluray drive for some of your games. If you have an Xbox One, you can use the Blu-ray drive that came with it.

If you have an older Xbox 360, you can buy a Blu-ray drive and attach it to your console. This will allow you to play some of your games without any issues.

Take it to a Repair Shop

If your Xbox 360 won’t read discs, it may be a simple problem that you can fix at home. However, if the problem persists, you may need to take it to a repair shop. Below are a few things that you must keep in mind in case you’re considering this specific option:

1. The first thing you’ll need to do is find a reputable repair shop. Make sure to read reviews online and see what other people have said about their experience.
2. Once you’ve found a few potential shops, call them and ask about pricing and turnaround time.
3. When you take your Xbox 360 in for repair, be sure to get a detailed estimate of the cost and time involved.

Restart the Operating System of your Console

The first thing you should do is restart the operating system of your console. In order to do this, make sure that you hold down the power button for about 10 seconds. Once the console has shut down, unplug it from the power outlet and wait for 30 seconds. After 30 seconds have passed, plug the power cord back in and turn on your console.

Check if there’s a disc in the drive (two sentences): If you see a disc in the drive, try removing it and then reinserting it. If the disc doesn’t appear to be inserted correctly, or if you don’t see a disc at all, then proceed to the next step.


Why won’t my Xbox 360 read discs anymore?

One of the most frequent causes of this problem is a defective or subpar laser. It becomes soiled and occasionally produces a disc error. Therefore, maintaining cleanliness is crucial.

What can I do to fix this problem?

Holding the Xbox button down for 10 seconds will turn your Xbox One off. Hold the sync, eject, and Xbox buttons on your console while it is off until you hear two beeps (around 10 seconds).

When you release the buttons, a factory reset menu will appear. The sync and Xbox buttons will function on an Xbox One S without an eject button.

Also read: How To Reset Your Xbox 360 If You’ve Lost Your Controller


If your Xbox 360 won’t read discs, it might be because the disc is dirty or scratched. If that’s not the problem, then it could be a more serious issue with the console itself.

In either case, there are a few things you can try to fix the problem. If you’re still having trouble, you may need to contact Microsoft for support.

Haider Sultan

I'm a qualified content writer for Peak Searchers, and I'm eager to produce articles about tech-related topics. My primary occupation is not writing, but I still regard it as a hobby and a love. I've been writing content as a job for a while now.

Leave a Reply

Your email address will not be published.