Fix Nintendo Switch That Won’t Work After Hard Reset – An Ultimate Guide
The Nintendo Switch is one of the most popular gaming consoles available in the market today. It is a versatile device that can be used as a home console or as a portable device. However, like all electronic devices, it can also face issues, and one of the most common issues is the Nintendo Switch not working after a hard reset.
I also had the same issue when I got a new Nintendo Switch. After resetting it, it was not working. I did not know what to do in that case. After some research, here are some of the points that I came up to.
If you have recently performed a hard reset on your Nintendo Switch and are now facing issues with it, this article is for you. We have put together a comprehensive guide on how to fix the Nintendo Switch not working after a hard reset issue.
Understanding the Problem
After a hard reset, if the Nintendo Switch does not turn on or is not working properly, it may be due to a variety of reasons. The most common cause is a low battery level. If the battery is too low, the console may not turn on or may turn off soon after turning it on.
Another possible cause is a software issue. Resetting the console can fix minor software issues that are causing it to malfunction. However, if the problem is more serious, such as a corrupted operating system or firmware, a factory reset may be necessary.
Hardware issues can also cause the Nintendo Switch to not work properly after a hard reset. For example, the power button or charging port may be damaged or defective. In this case, it may be necessary to get the console repaired or replaced.
To fix a Nintendo Switch that won’t work after a hard reset, you can try several troubleshooting steps, such as checking the battery level, resetting the console, and updating the software. If none of these steps work, it may be necessary to contact Nintendo Support for further assistance.
Troubleshooting Steps
To fix the issue of Nintendo Switch not working after a hard reset, we recommend following these troubleshooting steps:
Step 1: Charge the Console
Make sure your Nintendo Switch is fully charged before attempting any troubleshooting steps. Connect the console to the charger and wait for it to charge fully. If your Nintendo Switch won’t turn on after a hard reset, it’s possible that the battery is drained.
Try charging the console using the AC adapter that came with it. Make sure the charger is plugged into a working outlet, and connect the USB Type-C cable to the console. Leave the console to charge for at least 30 minutes before attempting to turn it on again.
Step 2: Perform a Soft Reset
Performing a soft reset on your Nintendo Switch can help to resolve issues with the console, including when it won’t turn on after a hard reset. Here are the steps to perform a soft reset:
- Locate the power button on the top of the console.
- Press and hold down the power button for at least 15 seconds.
- Release the power button and wait a few seconds.
- Press the power button again to turn the console on.
By performing a soft reset, you are essentially restarting the console and clearing any temporary issues that may be preventing it from turning on.
This is a quick and easy troubleshooting step that can be done without losing any data or settings on your Nintendo Switch. If your console still won’t turn on after a soft reset, you may need to try other troubleshooting steps such as charging the console or performing a factory reset
Step 3: Check the Joy-Con Controllers
If your Nintendo Switch won’t turn on after a hard reset, it’s also possible that the issue may be with the Joy-Con controllers. Here are some steps to check the Joy-Con controllers:
- Remove the Joy-Con controllers from the console by pressing the release button on the back of each controller and sliding them up.
- Make sure that the Joy-Con controllers are charged by sliding them onto the console while it is charging. The controllers should begin charging automatically.
- If the Joy-Con controllers are charged but still not working, try resetting them. To do this, hold down the small circular button on the side of each controller until the lights on the controller begin to flash.
- Once the lights stop flashing, try reconnecting the controllers to the console. Slide them onto the rails on the sides of the console until you hear a click.
If the Joy-Con controllers are the issue, reconnecting or resetting them may help to resolve the problem. If they are still not working, you may need to contact Nintendo’s customer support for further assistance.
It’s also worth noting that the issue may not be with the controllers, but with the console itself. Therefore, it’s important to try other troubleshooting steps before assuming that the controllers are the problem.
Step 4: Check for Software Updates
Another possible reason why your Nintendo Switch won’t turn on after a hard reset is due to outdated software. It’s important to make sure that your console’s software is up to date to ensure optimal performance. Here’s how to check for software updates:
- Connect your Nintendo Switch to the internet.
- From the Home menu, select “System Settings”.
- Scroll down and select “System”.
- Scroll down and select “System Update”.
- If an update is available, select “Update” to download and install the latest software.
Once the update is installed, restart your console and check if it turns on successfully. Updating your software can often fix bugs and glitches that may be causing issues with your console. It’s also important to keep your software up to date to take advantage of new features and security patches.
If your Nintendo Switch still won’t turn on after checking for software updates, there may be other issues at play. It’s important to continue with troubleshooting steps to determine the cause of the problem.
Step 5: Reset the Console to Factory Settings
If your Nintendo Switch still won’t turn on after trying the previous steps, you may need to reset the console to its factory settings. Here’s how to do it:
- Power off your Nintendo Switch by holding down the power button for at least 15 seconds.
- While the console is powered off, press and hold down both the volume up button and the volume down button.
- Without releasing the volume buttons, press and hold down the power button for about 3 seconds.
- Continue holding all three buttons until the Nintendo logo appears on the screen, then release the buttons.
- You will be prompted to choose a language and region. Follow the on-screen instructions to set up your console as if it were new.
Resetting your console to factory settings will erase all data and settings on the console, so it’s important to make sure that you have backed up any important data before proceeding with this step. This step should only be done as a last resort if other troubleshooting steps have failed to resolve the issue.
If resetting the console to factory settings does not fix the issue, it may be a hardware problem and you should contact Nintendo’s customer support for further assistance.
FAQs:
Q. Can a Hard Reset on Nintendo Switch Cause Data Loss?
A. Yes, a hard reset on Nintendo Switch results in the deletion of all user data, including game saves, screenshots, and user accounts.
Q. How Long Does It Take to Perform a Hard Reset on Nintendo Switch?
A. Performing a hard reset on Nintendo Switch takes less than a minute. However, the time taken to restore data can vary depending on the amount of data.
Q. Will Factory Resetting the Nintendo Switch Fix All Issues?
A. Factory resetting your Nintendo Switch can be an effective solution for many issues, such as software glitches or corrupted data. However, it’s important to keep in mind that it may not fix all issues.
If the issue is related to hardware, such as a damaged screen or a malfunctioning component, a factory reset will not be able to fix it. Additionally, if the issue is caused by a third-party accessory or software, a factory reset may not be able to fix it either.
Also read: Lost Your Nintendo Switch PIN? Here’s How To Factory Reset Without It!
Conclusion
In conclusion, a Nintendo Switch may not work properly after a hard reset due to various reasons. However, by following the troubleshooting steps mentioned above, you should be able to fix the issue and get back to enjoying your favorite games on the console. If the problem persists, you may need to contact Nintendo customer support for further assistance.
We hope this guide has been helpful in fixing your Nintendo Switch. If you have any further questions or concerns, feel free to reach out to us. Thank you for reading!
